Nikon 200-500 Lens Collar

KES NC-200-500V2 Replacement Lens Collar for Nikon AF-S 200-500mm
KES NC-200-500V2 Replacement Lens Collar for Nikon AF-S 200-500mm

I posted the other day that for my 53rd birthday my girl bought me a Nikon 200mm-500mm f/5.6 lens to use with my Nikon D810. For the most part the lens get’s stellar reviews. The single biggest complaint from users though is that lens collar is terrible in that it’s difficult to rotate the lens and the movement is rough. Fortunately there’s a few aftermarket lens collars for the Nikon 200-500 and the best reviewed and most recommended is the KES NC-200-500V2 Replacement Lens Collar. The Kirk solution is not cheap at just over $200. Kirk also recommends their LS-2 Lens Support Bracket for a complete solution. The support bracket is another $90 and it supports the front of lens for the purpose of making lens rotation smooth and effortless. It’s great to know this solution exists but I think before I take the plunge I’m going to see if I can modify the existing Nikon collar. I have nothing to lose.

Visit Kirk Photo


The KES NC-200-500V2 Replacement Lens Collar for Nikon AF-S 200-500mm f/5.6E ED VR Lens from Kirk Enterprises attaches directly to the rear barrel of the lens where the original collar was and locks into place by turning the locking knob. The lens foot is made with an Arca-type compatible double-dovetail design, which adds quick release functionality to the bottom of the foot and allows other accessories to attach to the top of the foot. Also, the 6061-T6 aluminum lens has a durable black anodized finish.

By replacing the foot originally supplied, it gives the lens a lower profile and a lower center of gravity. This provides better balance and stability when the lens is placed on a gimbal-type head. Located on the bottom of the foot are two safety stops, which prevent the lens from accidentally slipping if a clamp was partially opened. Kirk Enterprises recommends using the optional LS-2 Lens Support Bracket, which produces less stress on the camera’s mount.

Replaces Nikon’s original lens collar foot and provides a lower profile and lower center of gravity, providing better stability
Arca-type compatible double-dovetail design allows accessories to be attached to the bottom or the top of the lens
Black anodized 6061-T6 aluminum is resistant against abrasions and corrosion
Two safety stops, which prevent accidental slipping of the lens when a head clamp is partially open, are located on the bottom of the foot
Kirk Enterprises recommends using the optional LS-2 Lens Support Bracket, which produces less stress on the camera’s mount
Better balance and stability because of the collar’s lower profile and lower center of gravity

Lens Collar for Nikon 200-500mm f/5.6E AFS ED VR

KES LS-2 Additional Support for Nikon AF-S 200-500mm Lens
KES LS-2 Additional Support for Nikon AF-S 200-500mm Lens

KES quick release replacement lens collar for Nikon 200-500mm f/5.6E AFS ED VR lens. Part # : NC-200-500V2

FEATURES

  • Smooth rotation and positive lock
  • Easy grip locking knob
  • Offers maximum support and bracing
  • Can be used with lens support bracket (LS-2 available separately)

SPECIFICATIONS

  • Weight: 10.00 ounces
  • Dovetail design: Double with built in Arca-Style base plate
  • Finish: Black and silver satin anodize
  • Material: 6061-T6 aluminum and Delrin
  • Additional mounting hole: (2) 14-20 (1) 3/8-16
  • Safety Stops: Yes

Please note: The KES quick release lens support for Nikon 200-500 f/5.6E ED VR lens (LS-2), used in conjunction with the NC-200-500 replacement collar supports the front of the lens. By using the LS-2 lens support, the shift up and down is totally reduced when loosening the lens collar to rotate the lens.


Lens Support Bracket Nikon 200-500 f/5.6E ED VR

The KES quick release lens support for Nikon 200-500 f/5.6E ED VR lens, used in conjunction with the NC-200-500 replacement collar supports the front of the lens. By using the LS-2 lens support, the shift up and down is totally reduced when loosening the lens collar to rotate the lens. The LS-2 must be used with the KES NC-200-500 replacement collar which is sold separately

  • Weight: 2.9 ounces
  • Bearing/Bolt: Stainless
  • Knobs: Aluminum and captive
  • Finish: Black and Satin Silver anodize
  • Material: 6061-T6 aluminum

 

{{ reviewsOverall }} / 5 Users (0 votes)
Rating
What people say... Leave your rating
Order by:

Be the first to leave a review.

Verified
/ 5
{{{ review.rating_title }}}
{{{review.rating_comment | nl2br}}}

Show more
{{ pageNumber+1 }}
Leave your rating